| 产品特性：动物驱赶器 | 品牌：aosion | 型号：AN-B030 |
| 灭蚊驱虫驱螂种类：多功能驱虫器 | 是否支持充电：支持 | 外形：方型 |
| 包装种类：盒装 | 颜色：绿色 |
智能家居太阳能动物驱赶器
1. 当动物进入该装置所保护的区域，该装置就会发出高频率的超声波以及强闪光，使动物感到不适及恐慌并远离超声波所覆盖的范围。通过选择不同的超声波频率，避免动物产生适应性，驱赶效果更佳。、
2. 频率选择按钮
- 1: 13.5kHz-17.5kHz 驱赶如小鼠等鼠类动物
- 2: 15.5kHz-19.5kHz 驱赶如狗、狐狸等大动物
- 3: 19.5kHz-23.5kHz 驱赶如猫、小狗、小鸟、蝙蝠等动物
- 4: 强闪光
- 5: 所有模式依次启动。超声波频率从模式1转换到模式2再到模式3，并发出强闪光
3.技术参数
电源供应：3*AA电池
有效距离：约8m（根据天气和环境而定）
红外感应角度：110°（根据天气和环境而定）
4. 完全防水功能设计，适合户外使用
Patent Number: ZL.2012 30300821.9
1. A strong ultrasonic signal frighten animals. The animals avoid the area because of its unpleasant ultrasonic sound. The sound is activated when an animal enters the range. Thus, animals can not get used to the sound, and the repulsive effect is stronger.
2. A strong flashing scared animals. The strong flashing is activated when an animal enters the range, then the animals will be scared and give back.
Button "FREQ" Position:
- 1: 13.5kHz-17.5kHz Repels animals such as mice, small rodents, ...
- 2: 15.5kHz-19.5kHz Repels animals such as large dogs, foxes ...
- 3: 19.5kHz-23.5kHz Repels animals such as small dogs, cat, bird,bat...
- 4: Strong flashing
- 5: All function working, sweep frequency from mode 1 -- mode 2 -- mode 3, and turn on strong flashing
Specifications:
Power Supply: 3 x AA batteries
Effective distance: till max 8m (depending on weather and surroundings)
Detecting angel: 110° horizontal (depending on weather andsurroundings)
Fully waterproof.
COLOR BOX SIZE:11.4X7.5X14.8CM
QTY: 24 PCS
N.W.: 8.5 KGS
G.W.: 9.5 KGS
MEAS:35.5X32X31.5CM
20FT&＃39;:18768 pcs
40&＃39;FT&＃39;: 38880 pcs
40HQ:45576PCS
Warnning(Top Important)!!!
Battery Instructions
Step 1. When using the device for the first time, please use the device till the power(built-in batteries) is to the lowest: when the red low-voltage indicator will keep blinking or there is no reaction after turn-on the device.
Step 2. Connect the device to a standard USB output out, and use the USB cable in packaging charge the device for 6-12 hours:
2.1: Because of the different power and voltage output by different USB and different activity of batteries, it&＃39;s normal that the red indicator may keep flashing after charing for more than 12 hours(the device could be used normally even charging is stopped), please just install the device in a normal usage scenario and use it would be OK.
2.2: If the charging time is significantly less than 6 hours, but the indicator kept light up(showed charging finished, not flashing), please continue to charge for at least 6 hours.
Step 3. If the red indicator keeps flashing or the device stop working without any response after using for some time, please repeat Step 2., charge 6-12 hours, after 3-5 cycles of charge and discharge, the charge and discharge characteristics of the batteries would be stable and the charging index tends to be back to normal.
Step 4. Please do follow the three steps above to enable the batteries in the device to maximize their best performance.
SUITABLE ENVIRONMENT:
Do not use the device in any extreme environment.
Otherwise, important components of the device may be damaged or stop working.
Solar panel: air salinity NO more than 3%; Applicable temperature: -20℃ ~ +85℃
Ni-Cd battery applicable temperature:
-10℃ ~ +45℃ (over -10℃ ~ +50℃ can’t be charged, over -20℃ ~ +60℃ can’t output power)
Ni-MH battery applicable temperature:
-18℃ ~ +65℃ (over 0℃ ~ +55℃ can’t be charged, over -18℃ ~ +65℃ can’t output power)
Please dispose the batteries according to the your country&＃39;s laws and regulations.
